RP Series White & Titanium
All RP Series models are fitted with a dust seal and air filter to maintain water quality and the temperature thermostat is pre-set at manufacture for optimum results. In a workplace environment the RP Series has been designed to be as quiet as possible.
The unique ‘float valve’ assembly shuts water off when the level reaches approximately 6cm from the top of the bowl and the secondary float is a safety float which acts as a back up. The refrigerant used is eco-friendly, non-toxic and non-flammable.
Fact Sheet
download fact sheet
Cold Water Reservoir
-
Stainless Steel Tank
-
1.8Litre capacity
-
Chilling capacity of 5litres per hour
Hot Water Reservoir
-
Stainless steel tank
-
Two thermostats ensure reliable,accurate water temperature
-
Approx. 65 cups per hour at over 85deg C
-
Efficient wrap-around heating element
Technical Specifications
-
Compressors: 1/16 hp capacity,49 watts, hermetically sealed for silent running
-
Condenser: Static condenser favricated fronm steel tube & wire
-
Electrical: 240volts, 50Hz, 2m house cable & 3-pin plug supplied
-
Performance to ARI 1010-94 Standard: Inlet water -26.7degC, Outlet Water -10degC, Ambient Air-32.2degC
-
Weight-Packed: Cold/Cool Units -15kg, Hot/Cold Units- 16kg
-
Dimensions: Width-370mm, Depth-370mm, Cubic -950mm
